PSU Faculty Profiles

Abdallah Abdelkawy Abdelkawy A., El-Danaf El-Danaf E.A.,Abdulhakim Almajid Almajid A.

Jordan Journal of Mechanical and Industrial Engineering 2023-06-01,
The Effect of Alloying, Processing and Heat Treatment on the Wear Resistance of Al-Cu-Mg-Ag Alloys

Bandar Almeshari Almeshari B.,Harri Junaedi Junaedi H.,Muneer Baig Baig M.,Abdulhakim Almajid Almajid A.

Journal of Materials Research and Technology 2023-05-01,
Development of 3D printing short carbon fiber reinforced polypropylene composite filaments

Harri Junaedi Junaedi H.,Muneer Baig Baig M.,Abdulsattar Dawood Dawood A.,Essam Albahkali Albahkali E.,Abdulhakim Almajid Almajid A.

Materials 2022-11-01,
Effect of the Matrix Melt Flow Index and Fillers on Mechanical Properties of Polypropylene-Based Composites

Abdulhakim Almajid Almajid A.,Umashankar Subramaniam Subramaniam U.,Zubair Ahmed Memon Memon Z.A.,Sagar Bhaskar Mahajan Mahajan S.B.,Musa Adamu Adamu M.

IOP Conference Series: Earth and Environmental Science 2022-01-01,
PREFACE

Abdulhakim Almajid Almajid A.,Rolf Walter Walter R.,Tim Kroos Kroos T.,Harri Junaedi Junaedi H.,Martin Gurka Gurka M.,Khalil Abdelrazek Khalil Khalil K.A.

Polymers 2021-04-02,
The multiple uses of polypropylene/polyethylene terephthalate microfibrillar composite structures to support waste management—composite processing and properties

Abdulhakim A. Almajid Almajid A.A.

Metals 2021-04-01,
High-temperature deformation of naturally aged 7010 aluminum alloy

Harri Junaedi Junaedi H.,Muneer Baig Baig M.,Abdulsattar Dawood Dawood A.,Essam Albahkali Albahkali E.,Abdulhakim Almajid Almajid A.

Journal of Materials Research and Technology 2021-03-01,
Modeling analysis of the tensile strength of polypropylene base Short Carbon Fiber reinforced composites

Abdulhakim Almajid Almajid A.,Rolf Walter Walter R.,Tim Kroos Kroos T.,Harry Junaidi Junaidi H.,Martin Gurka Gurka M.,Khalil Abdelrazek Khalil Khalil K.A.

Polymers 2021-01-02,
Development of polypropylene/polyethylene terephthalate microfibrillar composites filament to support waste management

Harri Junaedi Junaedi H.,Muneer Baig Baig M.,Abdulsattar Dawood Dawood A.,Essam Albahkali Albahkali E.,Abdulhakim Almajid Almajid A.

Polymers 2020-12-01,
Mechanical and physical properties of short carbon fiber and nanofiller-reinforced polypropylene hybrid nanocomposites

Harri Junaedi Junaedi H.,Essam Albahkali Albahkali E.,Muneer Baig Baig M.,Abdulsattar Dawood Dawood A.,Abdulhakim Almajid Almajid A.

Advances in Polymer Technology 2020-01-01,
Ductile to Brittle Transition of Short Carbon Fiber-Reinforced Polypropylene Composites

Abdulhakim A. Almajid Almajid A.A.

Key Engineering Materials 2020-01-01,
Mechanical, physical, and wear properties of 3D printed polyactic acid materials

Harri Junaedi Junaedi H.,Essam Albahkali Albahkali E.,Muneer Baig Baig M.,Abdulhakim Almajid Almajid A.

AIP Conference Proceedings 2018-07-11,
The effect compatibilizer on mechanical properties of short carbon fiber reinforced polypropylene composites

Mohammad Islam Islam M.,Yasir Khalid Khalid Y.,Iftikhar Ahmad Ahmad I.,Abdulhakim A. Almajid Almajid A.A.,Amine Achour Achour A.,Theresa J. Dunn Dunn T.J.,Aftab Akram Akram A.,Saqib Anwar Anwar S.

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2018-07-01,
Microstructural Evaluation of Inductively Sintered Aluminum Matrix Nanocomposites Reinforced with Silicon Carbide and/or Graphene Nanoplatelets for Tribological Applications

Harri Junaidi Junaidi H.,Abdulrahman Alfawzan Alfawzan A.,Sattam Aloraini Aloraini S.,Turki Almutairi Almutairi T.,Abdulhakim Almajid Almajid A.

ICCM International Conferences on Composite Materials 2017-01-01,
Mechanical, physical, and wear properties of polypropylene reinforced short carbon fiber composites with different fiber length

Dar Dar M.A., Gul Gul R., Alfadda Alfadda A.A., Karim Karim M.R., Kim Kim D.W., Cheung Cheung C.L., Almajid Almajid A.A., Alharthi Alharthi N.H., Pulakat Pulakat L.

Science of Advanced Materials 2017-01-01,
Size-dependent effect of nanoceria on their antibacterial activity towards Escherichia coli

Dar Dar M.A., Nam Nam S.H., Abdo Abdo H.S., Almajid Almajid A.A., Kim Kim D.W., Qurashi Qurashi A., Kim Kim W.B.

Journal of Alloys and Compounds 2017-01-01,
Self-assembled Co<inf>3</inf>O<inf>4</inf>nanoplatelets into micro-spheres via a simple solvothermal route: Structural and electrochemical properties

Junaedi Junaedi H., Ibrahim Ibrahim M.F., Ammar Ammar H.R., Samuel Samuel A.M., Soliman Soliman M.S., Almajid Almajid A.A., Samuel Samuel F.H.

Journal of Composite Materials 2016-08-01,
Effect of testing temperature on the strength and fracture behavior of Al-B<inf>4</inf>C composites

Nguyen Nguyen Q.B., Quader Quader I., Sharon Nai Sharon Nai M.L., Seetharaman Seetharaman S., Wai Leong Wai Leong E.W., Almajid Almajid A., Gupta Gupta M.

Powder Metallurgy 2016-06-29,
Enhancing hardness, CTE and compressive response of powder metallurgy magnesium reinforced with metastable Al<inf>90</inf>Y<inf>10</inf> powder particles

Sankaranarayanan Sankaranarayanan S., Nguyen Nguyen Q.B., Shabadi Shabadi R., Almajid Almajid A.H., Gupta Gupta M.

Powder Metallurgy 2016-06-29,
Powder metallurgy hollow fly ash cenospheres’ particles reinforced magnesium composites

El-Sayed M. Sherif Sherif E.-S.M.,Hany S. Abdo Abdo H.S.,Jabair A. Mohammed Mohammed J.A.,Abdulhakim A. Almajid Almajid A.A.,Asiful H. Seikh Seikh A.H.

International Journal of Electrochemical Science 2016-06-01,
Corrosion of newly manufactured nanocrystalline al and two of its alloys in stagnant 4.0% NaCl solutions

Ganesh Kumar Meenashisundaram Meenashisundaram G.K.,Mui Hoon Nai Nai M.H.,Abdulhakim Almajid Almajid A.,Khalil Abdelrazek Khalil Khalil K.A.,Hany S. Abdo Abdo H.S.,Manoj Gupta Gupta M.

Journal of Alloys and Compounds 2016-04-15,
Effects of TiO<inf>2</inf> powder morphology on the mechanical response of pure magnesium: 1D nanofibers versus 0D nanoparticulates

Obaid Obaid M.,Zafar Khan Ghouri Ghouri Z.K.,Olfat A. Fadali Fadali O.A.,Khalil Abdelrazek Khalil Khalil K.A.,Abdulhakim A. Almajid Almajid A.A.,Nasser A. M. Barakat Barakat N.A.M.

ACS Applied Materials and Interfaces 2016-03-16,
Amorphous SiO<inf>2</inf> NP-Incorporated Poly(vinylidene fluoride) Electrospun Nanofiber Membrane for High Flux Forward Osmosis Desalination

Ganesh Kumar Meenashisundaram Meenashisundaram G.K.,Mui Hoon Nai Nai M.H.,Abdulhakim Almajid Almajid A.,Manoj Gupta Gupta M.

Materials 2016-02-26,
Reinforcing low-volume fraction nano-tin particulates to monolithical, pure MG for enhanced tensile and compressive response

Magdy M. El Rayes El Rayes M.M.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.

Materials Science Forum 2016-01-01,
Microstructural and mechanical characterization of artificially-aged power plant steel

Hiroshi Nishikawa Nishikawa H.,Abdulaziz N. Alhazaa Alhazaa A.N.,Siliang He He S.,Abdulhakim A. Almajid Almajid A.A.,Mahmoud S. Soliman Soliman M.S.

Key Engineering Materials 2016-01-01,
Interfacial reaction between Sn-Ag-Cu-Mg solder and enig substrate

El-Sayed M. Sherif Sherif E.-S.M.,Jabair Ali Mohammed Mohammed J.A.,Hany S. Abdo Abdo H.S.,Abdulhakim A. Almajid Almajid A.A.

International Journal of Electrochemical Science 2016-01-01,
Corrosion behavior in highly concentrated sodium chloride solutions of nanocrystalline aluminum processed by high energy ball mill

Iftikhar Ahmad Ahmad I.,Mohammad Islam Islam M.,Hany Sayed Abdo Abdo H.S.,Tayyab Subhani Subhani T.,Khalil Abdelrazek Khalil Khalil K.A.,Abdulhakim A. Almajid Almajid A.A.,Bahareh Yazdani Yazdani B.,Yanqiu Zhu Zhu Y.

Materials and Design 2015-12-25,
Toughening mechanisms and mechanical properties of graphene nanosheet-reinforced alumina

Nasser A.M. Barakat Barakat N.A.M.,Hajer M. Moustafa Moustafa H.M., Nassar Nassar M.M.,Mohammad Ali Abdelkareem Abdelkareem M.A., Mahmoud Mahmoud M.S.,Abdulhakim A. Almajid Almajid A.A.,Khalil Abdelrazek Khalil Khalil K.A.

Electrochimica Acta 2015-11-10,
Distinct influence for carbon nano-morphology on the activity and optimum metal loading of Ni/C composite used for ethanol oxidation

Obaid Obaid M.,Gehan M.K. Tolba Tolba G.M.K.,Moaaed Motlak Motlak M.,Olfat A. Fadali Fadali O.A.,Khalil Abdelrazek Khalil Khalil K.A.,Abdulhakim A. Almajid Almajid A.A.,Bongsoo Kim Kim B.,Nasser A.M. Barakat Barakat N.A.M.

Chemical Engineering Journal 2015-11-01,
Effective polysulfone-amorphous SiO<inf>2</inf> NPs electrospun nanofiber membrane for high flux oil/water separation

Sankaranarayanan Sankaranarayanan S., Sabat Sabat R.K., Jayalakshmi Jayalakshmi S., Suwas Suwas S., Almajid Almajid A., Gupta Gupta M.

Journal of Composite Materials 2015-10-22,
Mg/BN nanocomposites: Nano-BN addition for enhanced room temperature tensile and compressive response

Sankaranarayanan Sankaranarayanan S., Habibi Habibi M.K., Jayalakshmi Jayalakshmi S., Jia Ai Jia Ai K., Almajid Almajid A., Gupta Gupta M.

Materials Science and Technology (United Kingdom) 2015-07-01,
Nano-AlN particle reinforced Mg composites: Microstructural and mechanical properties

Moaaed Motlak Motlak M.,Nasser A.M. Barakat Barakat N.A.M.,M. Shaheer Akhtar Akhtar M.S.,Ahmed G. El-Deen El-Deen A.G., Obaid Obaid M.,Cheol Sang Kim Kim C.S.,Khalil Abdelrazek Khalil Khalil K.A.,Abdulhakim A. Almajid Almajid A.A.

Chemical Engineering Journal 2015-05-05,
High-efficiency dye-sensitized solar cells based on nitrogen and graphene oxide co-incorporated TiO<inf>2</inf> nanofibers photoelectrode

Moaaed Motlak Motlak M.,Nasser A.M. Barakat Barakat N.A.M.,M. Shaheer Akhtar Akhtar M.S., Hamza Hamza A.M.,Byoung-Suhk Kim Kim B.-S.,Cheol Sang Kim Kim C.S.,Khalil Abdelrazek Khalil Khalil K.A.,Abdulhakim A. Almajid Almajid A.A.

Electrochimica Acta 2015-04-01,
High performance of NiCo nanoparticles-doped carbon nanofibers as counter electrode for dye-sensitized solar cells

Ahmed G. El-Deen El-Deen A.G.,Jae-Hwan Choi Choi J.-H.,Cheol Sang Kim Kim C.S.,Khalil Abdelrazek Khalil Khalil K.A.,Abdulhakim A. Almajid Almajid A.A.,Nasser A.M. Barakat Barakat N.A.M.

Desalination 2015-04-01,
TiO<inf>2</inf> nanorod-intercalated reduced graphene oxide as high performance electrode material for membrane capacitive deionization

Almajid Almajid A., Sorochynska Sorochynska L., Friedrich Friedrich K., Wetzel Wetzel B.

Plastics, Rubber and Composites 2015-03-01,
Effects of graphene and CNT on mechanical, thermal, electrical and corrosion properties of vinylester based nanocomposites

Mohammad Islam Islam M.,Muhammad Rizwan Azhar Azhar M.R.,Narjes Fredj Fredj N.,T. David Burleigh Burleigh T.D.,Olamilekan R. Oloyede Oloyede O.R.,Abdulhakim A. Almajid Almajid A.A., Ismat Shah Ismat Shah S.

Surface and Coatings Technology 2015-01-15,
Influence of SiO<inf>2</inf> nanoparticles on hardness and corrosion resistance of electroless Ni-P coatings

Muneer Baig Baig M.,Ehab El-Danaf El-Danaf E.,Mahmoud Soliman Soliman M.,Abdulhakim Almajid Almajid A.,Waleed Alshalfan Alshalfan W.,Khaled Alhajeri Alhajeri K.

Materialpruefung/Materials Testing 2015-01-01,
Mechanical properties, microstructure and toughness assessment of a X70 pipeline steel

El-Sayed M. Sherif Sherif E.-S.M.,Hany S. Abdo Abdo H.S.,Abdulhakim A. Almajid Almajid A.A.

Materials 2015-01-01,
Corrosion behavior of cast Iron in freely aerated stagnant Arabian gulf seawater

Ahmed G. El-Deen El-Deen A.G.,Jae-Hwan Choi Choi J.-H.,Khalil Abdelrazek Khalil Khalil K.A.,Abdulhakim A. Almajid Almajid A.A.,Nasser A. M. Barakat Barakat N.A.M.

RSC Advances 2015-01-01,
A TiO<inf>2</inf> nanofiber/activated carbon composite as a novel effective electrode material for capacitive deionization of brackish water

El-Sayed M. Sherif Sherif E.-S.M.,Abdulhakim A. Almajid Almajid A.A.

International Journal of Electrochemical Science 2015-01-01,
Electrochemical corrosion behavior of API X-70 5L grade steel in 4.0 wt. % sodium chloride solutions after different immersion periods of time

Magdy M. El Rayes El Rayes M.M.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.

Materials Characterization 2015-01-01,
Characterization and correlation of mechanical, microstructural and ultrasonic properties of power plant steel

Ganesh Kumar Meenashisundaram Meenashisundaram G.K.,Mui Hoon Nai Nai M.H.,Abdulhakim Almajid Almajid A.,Manoj Gupta Gupta M.

Materials and Design 2015-01-01,
Development of high performance Mg-TiO<inf>2</inf> nanocomposites targeting for biomedical/structural applications

Magdy M. El Rayes El Rayes M.M.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.

Journal of Materials Processing Technology 2015-01-01,
Ultrasonic characterization of heat-treatment effects on SAE-1040 and -4340 steels

Obaid Obaid M.,Nasser A.M. Barakat Barakat N.A.M., Fadali Fadali O.A.,Moaaed Motlak Motlak M.,Abdulhakim A. Almajid Almajid A.A.,Khalil Abdelrazek Khalil Khalil K.A.

Chemical Engineering Journal 2015-01-01,
Effective and reusable oil/water separation membranes based on modified polysulfone electrospun nanofiber mats

Sravya Tekumalla Tekumalla S.,Sankaranarayanan Seetharaman Seetharaman S.,Abdulhakim Almajid Almajid A.,Manoj Gupta Gupta M.

Metals 2014-12-23,
Mechanical properties of magnesium-rare earth alloy systems: A review

Sankaranarayanan Sankaranarayanan S., Pranav Nayak Pranav Nayak U., Sabat Sabat R.K., Suwas Suwas S., Almajid Almajid A., Gupta Gupta M.

Journal of Alloys and Compounds 2014-12-05,
Nano-ZnO particle addition to monolithic magnesium for enhanced tensile and compressive response

Ehab A. El-Danaf El-Danaf E.A.,Muneer Baig Baig M.,Abdulhakim A. Almajid Almajid A.A.,Mahmoud S. Soliman Soliman M.S.

IOP Conference Series: Materials Science and Engineering 2014-01-01,
The fracture strength of cryomilled 99.7 Al nanopowders consolidated by high frequency induction sintering

Friedrich Friedrich K., Almajid Almajid A.A.

AIP Conference Proceedings 2014-01-01,
Solid particle erosion of polymers and composites

Walid Hanna Hanna W.,Khinlay Maung Maung K.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.,Mahmoud S. Soliman Soliman M.S.,Farghalli A. Mohamed Mohamed F.A.

Advances in Materials Science and Engineering 2014-01-01,
Nanocrystalline 6061 Al powder fabricated by cryogenic milling and consolidated via high frequency induction heat sintering

Iftikhar Ahmad Ahmad I.,Mohammad Islam Islam M.,Abdulhakim A. Almajid Almajid A.A.,Bahareh Yazdani Yazdani B.,Yanqiu Zhu Zhu Y.

Ceramics International 2014-01-01,
Investigation of yttria-doped alumina nanocomposites reinforced by multi-walled carbon nanotubes

Asiful Hossain Seikh Hossain Seikh A.,Mahmoud S. Soliman Soliman M.S.,Abdulhakim Almajid Almajid A.,Khaled Alhajeri Alhajeri K.,Waleed Alshalfan Alshalfan W.

Advances in Materials Science and Engineering 2014-01-01,
Austenite grain growth kinetics in API X65 and X70 line-pipe steels during isothermal heating

Magdy M. El Rayes El Rayes M.M.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.

TMS Annual Meeting 2014-01-01,
Ultrasonic non-destructive characterization of power plant steel

El-Sayed M. Sherif Sherif E.-S.M.,Abdulhakim A. Almajid Almajid A.A.

Journal of Chemistry 2014-01-01,
Anodic dissolution of API X70 pipeline steel in Arabian Gulf seawater after different exposure intervals

Almajid Almajid A., Friedrich Friedrich K., Noll Noll A., Gyurova Gyurova L.

Plastics, Rubber and Composites 2014-01-01,
Poly-para-phenylene-copolymers (PPPs). Part 3: Scratch and wear resistance

Ibrahim Ibrahim M.F., Ammar Ammar H.R., Samuel Samuel A.M., Soliman Soliman M.S., Almajid Almajid A., Samuel Samuel F.H.

International Journal of Cast Metals Research 2014-01-01,
Mechanical properties and fracture of Al-15 vol.-%B<inf>4</inf>C based metal matrix composites

Friedrich Friedrich K., Pei Pei X.-Q., Almajid Almajid A.A.

Tribologie und Schmierungstechnik 2013-11-15,
Solid particle erosion of carbon fiber reinforced PEEK composites and possible protective polymeric films

Almajid Almajid A., Friedrich Friedrich K., Noll Noll A., Gyurova Gyurova L.

Plastics, Rubber and Composites 2013-10-18,
Poly-para-phenylene-copolymers (PPP) for extrusion and injection moulding. Part 2: Mechanical behaviour

El-Sayed Sherif Sherif E.M.,Abdulhakim Almajid Almajid A.A.,Khalil Abdelrazek Khalil Khalil K.A.,Harri Junaedi Junaedi H., Latief Latief F.H.

International Journal of Electrochemical Science 2013-08-21,
Electrochemical studies on the corrosion behavior of API X65 pipeline steel in chloride solutions

Ehab A. El-Danaf El-Danaf E.A.,Mahmoud S. Soliman Soliman M.S.,Abdulhakim A. Almajid Almajid A.A.,Khalil Abdelrazek Khalil Khalil K.A.

Advances in Materials Science and Engineering 2013-08-05,
Mechanical characterization of cryomilled Al powder consolidated by high-frequency induction heat sintering

Friedrich Friedrich K., Pei Pei X.-Q., Almajid Almajid A.A.

Journal of Reinforced Plastics and Composites 2013-05-01,
Specific erosive wear rate of neat polymer films and various polymer composites

Klaus Friedrich Friedrich K.,Abdulhakim A. Almajid Almajid A.A.

Applied Composite Materials 2013-04-01,
Manufacturing aspects of advanced polymer composites for automotive applications

Almajid Almajid A., Friedrich Friedrich K., Noll Noll A., Gyurova Gyurova L.

Plastics, Rubber and Composites 2013-04-01,
Poly-para-phenylene-copolymers (PPP) for extrusion and injection moulding: Part 1 - Molecular and rheological differences

El-Sayed M. Sherif Sherif E.-S.M.,Mahmoud S. Soliman Soliman M.S.,Ehab A. El-Danaf El-Danaf E.A., Almajid Almajid A.A.

International Journal of Electrochemical Science 2013-01-01,
Effect of equal-channel angular pressing passes on the corrosion behavior of 1050 aluminum alloy in natural seawater

Ehab El-Danaf El-Danaf E.,Muneer Baig Baig M.,Abdulhakim Almajid Almajid A.,Waleed Alshalfan Alshalfan W.,Marawan Al-Mojil Al-Mojil M.,Saeed Al-Shahrani Al-Shahrani S.

Materials and Design 2013-01-01,
Mechanical, microstructure and texture characterization of API X65 steel

Khalil Abdelrazek Khalil Khalil K.A.,Abdulhakim A. Almajid Almajid A.A.,Ehab A. El-Danaf El-Danaf E.A.,Magdy M. El Rayes El Rayes M.M.,El-Sayed M. Sherif Sherif E.-S.M.

International Journal of Electrochemical Science 2012-12-20,
Direct fabrication of yttrium aluminium garnet nanofibers by electrospinning

Abdulhakim Almajid Almajid A.,Klaus Friedrich Friedrich K.

AIP Conference Proceedings 2012-12-01,
Rolling contact fatigue of various unfilled and fiber reinforced polymers

El-Sayed M. Sherif Sherif E.-S.M., Latief Latief F.H., Junaedi Junaedi H., Almajid Almajid A.A.

International Journal of Electrochemical Science 2012-07-02,
Influence of exfoliated graphite nanoplatelets particles additions and sintering temperature on the mechanical properties of aluminum matrix composites

Mahmoud S. Soliman Soliman M.S.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.

Materials and Manufacturing Processes 2012-07-01,
Effect of equal-channel angular pressing process on properties of 1050 Al alloy

El-Sayed M. Sherif Sherif E.-S.M.,Ehab A. El-Danaf El-Danaf E.A.,Mahmoud S. Soliman Soliman M.S.,Abdulhakim A. Almajid Almajid A.A.

International Journal of Electrochemical Science 2012-06-28,
Corrosion passivation in natural seawater of aluminum alloy 1050 processed by equal-channel-angular-press

El-Sayed M. Sherif Sherif E.-S.M., Almajid Almajid A.A., Bairamov Bairamov A.K.,Eissa Al-Zahrani Al-Zahrani E.

International Journal of Electrochemical Science 2012-06-28,
A comparative study on the corrosion of monel-400 in aerated and deaerated arabian gulf water and 3.5% sodium chloride solutions

Khalil Abdelrazek Khalil Khalil K.A.,Abdulhakim A. Almajid Almajid A.A.

Materials and Design 2012-04-01,
Effect of high-frequency induction heat sintering conditions on the microstructure and mechanical properties of nanostructured magnesium/hydroxyapatite nanocomposites

Nurhadi S. Waluyo Waluyo N.S.,Abdulhakim A. Almajid Almajid A.A.,Mahmoud A. Soliman Soliman M.A.

Advanced Materials Research 2012-02-27,
Microwave sintering of barium ferrite nanoparticles processed via sol-gel method

Friedrich Friedrich K., Knör Knor N., Almajid Almajid A.A.

Mechanics of Composite Materials 2012-01-01,
Processing-structure-property relationships of T hermoplastic nanocomposites used in friction and wear applications

Mahmoud T. Abdu Abdu M.T.,Mahmoud S. Soliman Soliman M.S.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.,Farghalli A. Mohamed Mohamed F.A.

Materials Science and Engineering: A 2012-01-01,
Creep characteristics and microstructure in nano-particle strengthened AA6082

Mahmoud S. Soliman Soliman M.S.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.

Materials Science and Engineering: A 2012-01-01,
Enhancement of static and fatigue strength of 1050 Al processed by equal-channel angular pressing using two routes

Khalil Abdelrazek Khalil Khalil K.A.,El-Sayed M. Sherif Sherif E.-S.M.,Abdulhakim A. Almajid Almajid A.A.

International Journal of Electrochemical Science 2011-12-01,
Corrosion passivation in simulated body fluid of magnesium/hydroxyapatite nanocomposites sintered by high frequency induction heating

El-Sayed M. Sherif Sherif E.-S.M., Almajid Almajid A.A., Bairamov A.K. Bairamov A.K.,Eissa Al-Zahrani Al-Zahrani E.

International Journal of Electrochemical Science 2011-11-01,
Corrosion of Monel-400 in aerated stagnant Arabian Gulf seawater after different exposure intervals

Friedrich Friedrich K., Sue Sue H.J., Liu Liu P., Almajid Almajid A.A.

Tribology International 2011-08-01,
Scratch resistance of high performance polymers

El-Sayed M. Sherif Sherif E.M.,Abdulhakim A. Almajid Almajid A.A.

International Journal of Electrochemical Science 2011-06-01,
Corrosion of magnesium/manganese alloy in chloride solutions and its inhibition by 5-(3-aminophenyl)-tetrazole

Abdulhakim Almajid Almajid A.,Klaus Friedrich Friedrich K.,Joachim Floeck Floeck J.,Thomas Burkhart Burkhart T.

Applied Composite Materials 2011-06-01,
Surface damage characteristics and specific wear rates of a new continuous carbon fiber (CF)/polyetheretherketone (PEEK) composite under sliding and rolling contact conditions

El-Sayed M. Sherif Sherif E.-S.M., Almajid Almajid A.A.,Fahamsyah Hamdan Latif Latif F.H.,Harri Junaedi Junaedi H.

International Journal of Electrochemical Science 2011-04-01,
Effects of graphite on the corrosion behavior of aluminum-graphite composite in sodium chloride solutions

Friedrich Friedrich K., Almajid Almajid A.A., Noll Noll A., Burkhart Burkhart T.

Journal of Materials Science 2011-03-01,
Effect of thermal treatment on hardness and fracture toughness of a poly-para-phenylene-copolymer

Abdulhakim A. Almajid Almajid A.A.

World Academy of Science, Engineering and Technology 2011-02-01,
Microwave synthesis of nanocrystalline yttria

Abdulhakim Abdulrahman Almajid Almajid A.A.

Journal of King Saud University - Engineering Sciences 2011-01-01,
High temperature deformation of solution treated 7010 Al-alloy

Latief Latief F.H.,El-Sayed M. Sherif Sherif E.-S.M., Almajid Almajid A.A., Junaedi Junaedi H.

Journal of Analytical and Applied Pyrolysis 2011-01-01,
Fabrication of exfoliated graphite nanoplatelets-reinforced aluminum composites and evaluating their mechanical properties and corrosion behavior

Ehab A. El-Danaf El-Danaf E.A.,Mahmoud S. Soliman Soliman M.S.,Abdulhakim A. AlMajid AlMajid A.A.

Materials Science Forum 2011-01-01,
Texture manipulation in commercial purity aluminum by deformation path change from ECAP to plane strain compression

Mahmoud S. Soliman Soliman M.S.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.

Materials Science Forum 2011-01-01,
Static and cyclic deformation of commercially pure Al processed by equal-channel angular pressing using two routes

Friedrich Friedrich K., Burkhart Burkhart T., Almajid Almajid A.A., Haupert Haupert F.

International Journal of Polymeric Materials and Polymeric Biomaterials 2010-09-01,
Poly-para-phenylene-copolymer (PPP): A high-strength polymer with interesting mechanical and tribological properties

El-Sayed M. Sherif Sherif E.-S.M.,Abdulhakim A. Almajid Almajid A.A.

Journal of Applied Electrochemistry 2010-08-01,
Surface protection of copper in aerated 3.5% sodium chloride solutions by 3-amino-5-mercapto-1,2,4-triazole as a copper corrosion inhibitor

Mahmoud S. Soliman Soliman M.S.,Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.

TMS Annual Meeting 2010-05-21,
Deformation characteristics of A 6082-Al alloy at high temperatures

Ehab A. El-Danaf El-Danaf E.A.,Mahmoud S. Soliman Soliman M.S.,Abdulhakim A. Almajid Almajid A.A.

Materials Science and Engineering: A 2010-04-25,
Effect of deformation path change on plastic response and texture evolution for 1050 Al pre-deformed by ECAP and subsequently plane strain compressed

Harrass Harrass M., Friedrich Friedrich K., Almajid Almajid A.A.

Tribology International 2010-03-01,
Tribological behavior of selected engineering polymers under rolling contact

Mahmoud S. Soliman Soliman M.S.,Ehab A. EL-Danaf EL-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.

Advanced Materials Research 2010-02-10,
Effect of heat treatment conditions on the high temperature deformation of 6082-AL alloy

Abdulhakim A. Almajid Almajid A.A.,Ehab A. El-Danaf El-Danaf E.A.,Mahmoud S. Soliman Soliman M.S.

Journal of Materials Science 2009-10-01,
Effect of combining plane-strain compression with equal channel angular pressing on mechanical properties and texture development in an Al alloy

Mohamed Shehata Aly Shehata Aly M.,Abdulhakim Almajid Almajid A.,Satoshi Nakano Nakano S.,Shojiro Ochiai Ochiai S.

Materials Science and Engineering: A 2009-08-30,
Fracture of open cell copper foams under tension

Ehab A. El-Danaf El-Danaf E.A.,Mahmoud S. Soliman Soliman M.S.,Abdulhakim A. Almajid Almajid A.A.

Materials and Manufacturing Processes 2009-06-01,
Effect of solution heat treatment on the hot workability of Al-Mg-Si alloy

Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.,Mahmoud S. Soliman Soliman M.S.

Journal of Materials Science 2008-09-01,
Hot deformation of AA6082-T4 aluminum alloy

Ehab A. El-Danaf El-Danaf E.A.,Abdulhakim A. Almajid Almajid A.A.,Mahmoud S. Soliman Soliman M.S.

Journal of Materials Engineering and Performance 2008-08-01,
High-temperature deformation and ductility of a modified 5083 Al alloy

El-Danaf El-Danaf E.A., Soliman Soliman M.S., Almajid Almajid A.A., El-Rayes El-Rayes M.M.

Materials Science and Engineering: A 2007-06-15,
Enhancement of mechanical properties and grain size refinement of commercial purity aluminum 1050 processed by ECAP

Yasuo Kuga Kuga Y.,Seung-Woo Lee Lee S.-W.,Minoru Taya Taya M.,Abdulhakim Almajid Almajid A.,Sangil Lee Lee S.,Jing-Feng Li Li J.-F.,Ryuzo Watanabe Watanabe R.

IEEE Transactions on Dielectrics and Electrical Insulation 2005-08-01,
Experimental and numerical studies of dielectric properties of BaTiO <inf>3</inf>-platinum composites at microwave frequencies

Minoru Taya Taya M.,Abdulhakim A. Almajid Almajid A.A.,Martin Dunn Dunn M.,Hirofumi Takahashi Takahashi H.

Sensors and Actuators, A: Physical 2003-11-01,
Design of bimorph piezo-composite actuators with functionally graded microstructure

Jing-Feng Li Li J.-F.,Kenta Takagi Takagi K.,Masaru Ono Ono M.,Wei Pan Pan W.,Ryuzo Watanabe Watanabe R.,Abdulhakim Almajid Almajid A.,Minoru Taya Taya M.

Journal of the American Ceramic Society 2003-01-01,
Fabrication and evaluation of porous piezoelectric ceramics and porosity-graded piezoelectric actuators

Jing-Feng Li Li J.-F.,Kenta Takagi Takagi K.,Shohei Yokoyama Yokoyama S.,Ryuzo Watanabe Watanabe R.,Abdulhakim Almajid Almajid A.,Minoru Taya Taya M.

Materials Science Forum 2003-01-01,
Piezoelectric ceramic/metal bending actuators with functionally graded microstructures

Kenta Takagi Takagi K.,Jing-Feng Li Li J.-F.,Ryuzo Watanabe Watanabe R.,Abdulhakim Almajid Almajid A.,Minoru Taya Taya M.

Materials Science Forum 2003-01-01,
Development of piezoelectric ceramic actuators with graded porosity

Yasuo Kuga Kuga Y.,Seung-Woo Lee Lee S.-W.,Abdulhakim Almajid Almajid A.,Minoru Taya Taya M.,Jing-Feng Li Li J.-F.,Ryuzo Watanabe Watanabe R.

Proceedings of SPIE - The International Society for Optical Engineering 2002-12-01,
Experimental and numerical studies of microwave properties of BaTiO<inf>3</inf>-Pt composites

Kenta Takagi Takagi K.,Jing-Feng Li Li J.-F.,Shohei Yokoyama Yokoyama S.,Ryuzo Watanabe Watanabe R.,Abdulhakim Almajid Almajid A.,Minoru Taya Taya M.

Science and Technology of Advanced Materials 2002-03-01,
Design and fabrication of functionally graded PZT/Pt piezoelectric bimorph actuator

Abdulhakim Almajid Almajid A.,Minoru Taya Taya M.,Kenta Takagi Takagi K.,Jing-Feng Li Li J.-F.,Ryuzo Watanabe Watanabe R.

Proceedings of SPIE-The International Society for Optical Engineering 2002-01-01,
Fabrication and modeling of porous FGM piezoelectric actuators

Abdulhakim Almajid Almajid A.,Minoru Taya Taya M.,Steven Hudnut Hudnut S.

International Journal of Solids and Structures 2001-03-30,
Analysis of out-of-plane displacement and stress field in a piezocomposite plate with functionally graded microstructure

Abdulhakim A. Almajid Almajid A.A.,Minoru Taya Taya M.

Journal of Intelligent Material Systems and Structures 2001-01-01,
2D-elasticity analysis of FGM piezo-laminates under cylindrical bending

Abdulhakim Almajid Almajid A.,Minoru Taya Taya M.

American Society of Mechanical Engineers, Aerospace Division (Publication) AD 2000-12-01,
Modeling of disc shaped FGM piezoelectric actuator

Abdulhakim Almajid Almajid A.,Minora Taya Taya M.

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 2000-01-01,
Modeling of disc shaped fgm piezoelectric actuator

Hudnut Hudnut Steven, Almajid Almajid Abdulhakim, Taya Taya Minoru

Proceedings of SPIE - The International Society for Optical Engineering 2000-01-01,
Functionally gradient piezoelectric bimorph type actuator

Almajid Almajid Abdulhakim, Hudnut Hudnut Steven, Taya Taya Minoru

Proceedings of SPIE - The International Society for Optical Engineering 2000-01-01,
Modeling of finger-like functionally graded microstructure piezoelectric actuator